kuhlmann Opal P/Opal PL(OP/OPL系列铣雕机)

Opal P is characterized by its large working area and flexible optional equipment.
The movable portal driven from both sides with ball screws guarantees for high precision for professional use.On request glass scales are available as direct path measuring system in order to achieve highest position accuracy.

Clamping systems especially developed for large workpieces allow optimum use of the large working areaPowerful milling spindles can be used as multi-spindle device in order to increase productivity. Customers can choose between the engraving machine control KM4 and the DIN control andronic KM3060.

Opal P 的特点是其工作台面积大以及灵活的可选设备。

双面滚珠丝杠移门驱动为高精度专业应用提供保障。
在要求下，玻璃光栅尺可以作为直接路径测量系统以达到最高的定位精度。

专门为大型工件加工而开发的夹持系统允许较大工作空间的最佳利用。

高性能铣削主轴可作为多轴设备使用以提高生产率。

用户可选择雕刻机KM4控制系统或Andronic KM3060 DIN控制系统。

Opal P / Opal PL brochure (pdf)

Applications:  front plates, plates, flow charts, control panels, scales, billboards, housings, serial milling parts...

应用：前面板、流程图、控制面板、比例尺、广告牌、外壳、系列铣削零件...等

Materials:stainless steel, steel up to 63HRC, aluminium, brass, copper, plastics, wood ...

材料：不锈钢、63HRC钢、铝、黄铜、铜、塑料。木材...

Options选项

Work table with integrated vacuum system真空系统集成工作台

segments switchable + rope seal cast iron T-slot work table

段切换+密封线铸铁T型槽工作台
Alternatively 还可选择
various AL vacuum tables

各种铝真空工作台

Pick-up tool changer
with tool length measuring system

自动拾刀更换器带刀具长度测量系统

…for various spindles

适用于不同主轴
multi-spindle operation

多轴操作
dustproof 防尘
position controlled 位置控制

Tool length measuring system

刀具长度测量系统

hard metal measuring area

硬质合金测量面
measuring power 2,5N

测力2.5N
repeat accuracy 0,001 mm

重复精度0.001mm

Slewable surface sensor

回转表面探头

Z-touch of surface

表面Z接触
exchangeable probe tip

可互换探针
SW required

需要软件

Milling spindle packages

铣削主轴包

Various manufacturers 各类生产商
power 1 - 10 kW 功率：1-10kW
rotational speed up to 60,000 RPM

最大转速：60000转
air or water cooling 空气或水冷却

Surface tracing

表面跟踪

plastic probe tip

塑料探针
or或
pneumatical probe tip

气动探针

Multi-spindle device 多主轴装置

for serial parts 为零部件生产
up to 5 milling spindles 高达5轴
tool changer optionally 可选换刀器

Dust extraction除尘

to be mounted on clamping unit

安装在夹持部件上
height manually adjustable

高度可手动调节
connection to external dust extractor

连接到外部除尘器
diameter 26 mm

直径26mm